intel ssd工具里边的smart信息（The smart information inside the Intel SSD tool）.doc

下载文档

80
0
约 5页
2017-09-05 发布于河南
举报
版权申诉
保障服务

intel ssd工具里边的smart信息（The smart information inside the Intel SSD tool）.doc

1、本文档共5页，可阅读全部内容。
2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。

intel ssd工具里边的smart信息（The smart information inside the Intel SSD tool）

intel ssd工具里边的smart信息（The smart information inside the Intel SSD tool） [turn] read Intel SSD tool inside the SMART information, and determine what time will hang disc First of all, see the Intel SSD smart information is best the most convenient of course is its own toolbox, use other tools to view is not impossible, but a lot of data to their conversion, a lot of trouble. The meaning of each option below to write about: The first value is divided into three: Raw, Normalized, the original value; the normal value is actually some value is a relative, with the description of what kind of a level (such as wear 60% such); threshold, the critical value for some projects more than this value will have the unfortunate thing happened 03: hard disk magnetic head loading time This SSD is not so boring. This is a fixed value, 0 04: start stop time This is meaningless, fixed for 0 05: re mapping sector number This user is very sensitive to the mechanical hard disk. In fact, for flash, his life is a normal distribution, that is MLC can write more than 10000 times, as it is written 10000 times wont happen until substantial damage, some may write dozens of times it was broken. In other words, the flash broken is very normal. Intel retains a certain space in the manufacture of solid state disk, when a flash is bad to isolate problems, good to replace. All flash devices have this problem, no need to get excited over a little thing. With the use of this value will continue to grow, as long as the growth rate of OK is good. 50nm disk (generation) to see the value of Normalized. The initial value is 100. When there is heavy mapping sector this will not immediately change, until the 3 sector. Once the mapping to 4 sectors, this variable is 1, after each increase of 4 Normalized value +1. That is, 0-3 corresponding to the 1 sector 100, corresponding to 4-7 of 2 sectors, corresponding to the 8-11 sector, the 3 sector corresponding to 12-15, and so on...... 34nm disk (two generation) direct