win7双启动引导修复（Win7 dual boot boot repair）.docVIP

win7双启动引导修复（Win7 dual boot boot repair） Win7: dual boot repair One problem: the original system XP in C. Install the win7 ghost to the D disk. Obviously, D disk win7 boot, the need to manually repair. Repair method for [] notes: 1. enter the C drive XP, run the CMD into the XP command line mode. input D: CD d:\windows\system32 Bcdboot d:\windows /l zh-cn /s c: Running the above command, to generate the \boot folder and the BOOTMGR file in the root directory of C. [D disk under has a complete win7, not only is the system tray guide, it must first in C win7 boot environment reconstruction. Through the built-in Windows7 bcdboot command can easily achieve this point. This command cannot modify the boot record, I use VHD to verify] 2. go to the win7 installation CD, find the bootsect.exe file (if you cant find it online to download a note to win7), copied to the C:\boot\ folder. Then enter the command line: CD c:\boot Bootsect /nt60 c: Bootsect /nt60 c: /mbr This command is completed, before the completion of all the following steps must not restart XP, otherwise XP will not start! [bootsect, win7 need to write information to guide the boot record, the first bootsect command to guide information to the C drive partition boot record, second bootsect commands to guide the information written to the hard disk master boot record. The master boot record and partition boot record has been modified to support BOOTMGR, so the guide NTLDR XP will not be able to guide the subsequent steps, we will fix it] In the 3. to XP from the command line input. D: CD d:\Windows\system32 Bcdedit /create {ntldr} /d Windows XP Bcdedit /set {ntldr} device boot Bcdedit /set {ntldr} path \ntldr Bcdedit /displayorder {ntldr} /addlast Bcdedit /timeout 10 [this step, we use the Bcdedit command to XP reconstruction in bcd. This guide through BOOTMGR loaded BCD XP, then the NTLDR boot manager start control to XP, XP start] Thus, double boot repair is complete. The above command, each command must be su