完美提车七步骤（Perfect lift seven steps）.doc

完美提车七步骤（Perfect lift seven steps） The perfect car (seven steps before Car Buying printed with a hook) Or you are particularly concerned about these small problems, you can also contact with vendors further, for replacement of a car. If the inspection found a big problem in the process, such as engine abnormal, you should argue with the dealer, it must be replaced. If no replacement vehicles under the premise of short-term, the tradeoff between paint, interior and engine and chassis, engine and chassis to heavy. Dont you see the car has a good engine and chassis? If there is no problem, then congratulations to you, you can open the car to go home or go directly to handle the licensing procedures. The requirements in the contract with a card: if found the car before there is any quality problem (unless I use during human caused), without conditions for a same level of the car A vehicle inspection data - vehicle certificate - three package service warranty card - vehicle manual / other documents or other accessories - check the nameplate. Two, before the start of the vehicle inspection The flatness of the flatness of the plate body - body, bumper no concave and convex Body fangcatiao and decorative line - flat, smooth, consistent interface gap Door gap - uniform and symmetrical Open the door - flexible, calm, Paint - free of scratches, corner edge without rust The car paint will be parked in the viewing position - place outdoor light Far view - the whole car color is consistent, coordinated, uniform, full, smooth, no pinholes, pits, wrinkled skin, bubbling, flow marks and scratches, Harmonia color boundary should be clear, without paint. Look at the top and bottom of the body is not easy to detect; Look - no scratches, cracking, blistering, rust, scratches, traces of paint mend. With the hand, hand can feel the eye is not easy to detect the fine lines, dont be dirt or dust from waste marks, especially in the transport process by scraping the surface of this inspection