中国电能质量网-变压器的故障分析及处理（Fault analysis and treatment of power quality network transformer in China）.docVIP

中国电能质量网-变压器的故障分析及处理（Fault analysis and treatment of power quality network transformer in China） China power [fault analysis and treatment on Saturday June 17, 2006 - quality network transformer set home] [add] [] of contact us The list of products regulations and standards of power dynamic power technology forum paper enterprise pictures Your current location: home electrical electrician knowledge base -- -- -- text Fault analysis and treatment of transformer Author: unknown source: unknown time: 2006-3-14 Fault analysis and treatment of transformer Abnormal sound The transformer during normal operation, a continuous uniform buzz sound. If the sound is not uniform or have other special sound, it should be regarded as the transformer operation is not normal, and according to the different voices to find out the fault and timely treatment. Mainly has the following fault: Power grid overvoltage. Single-phase grounding transformer or electromagnetic resonance, voice than usual sharp. When this is the case, can be combined with the voltage meter indicating the comprehensive judgment. Transformer overload. The load changes, and because of the harmonic function, intermittent sound instantaneous Wah Wah sound or giggle in the transformer, monitoring and measuring instrument pointer swing and high pitch, large volume. The clamping piece of the transformer or screw loosening. The sound is obviously larger than usual and noise, but the current and voltage and no obvious abnormal, there may be an internal clamp or pressing iron screw loosening, resulting in the increase of the silicon steel sheet vibration. Transformer partial discharge. If the transformer drop fuse or switch contact, discharge sound squeaky; if the transformer casing dirty transformer, the surface of the enamel off or crack, can hear hissing sound; if the transformer partial discharge or electric connect, will send a squeak or crackling sound, and the sound will change with the distance from the fault, and