高温固体自润滑涂层的组织和性能.pdfVIP

第十一届国际热喷涂研讨会论文 (ITSS’2008) 第十二届全国热喷涂年会论文 (CNTSC’2008) 高温固体自润滑涂层的组织及性能 1，2 2 2 2 2 2 徐娜 ，常新春 ，张甲 ，侯万良 ，张春智 ，全明秀 ① （1 沈阳工业大学 辽宁沈阳 110178 2 中国科学院金属研究所 辽宁沈阳 110016） 摘要：高温固体自润滑涂层由于其极好的附着性及摩擦学性能，已成为箔片空气轴承用高温固体润滑涂层的首 选。本文对国外高温固体自润滑涂层的研究进展进行了综述，重点阐述了该涂层的摩擦学性能，并与本所研制的高 温固体自润滑涂层的组织及性能进行了比较。结果表明，研制的涂层组织结构均匀，涂层结合强度明显高于国外， 且低温摩擦学性能优于国外，高温摩擦学性能与国外相当。 关键词：高温固体润滑涂层；摩擦学特性；等离子喷涂 Microstructure and Property of High Temperature Solid Self-Lubricanting Coatings 1,2 2 2 2 2 2 Xu Na , Chang Xinchun , Zhang Jia , Hou Wanliang , Zhang Chunzhi , Quan Mingxiu （1 Shenyang University of Technology, Shenyang 110178, China 2 Institute of Metal Research Chinese Academy of Sciences, Shenyang 110016, China ） Abstract: The high temperature solid self-lubricanting coating with better adhesive property and tribological property is a good candidate to apply for the foil air bearing as solid lubricant coating. In this paper the development of high temperature solid self-lubricanting coating, especially on the tribological property, was summarized, and compared to microstructure and property of high temperature solid self-lubricanting coating fabricated by IMR. The results show that compared to coating reported by abroad, the coating studied here possesses uniform microstructure, higher adhesive strength, good low and high temperature tribological property. Key words: High Temperature Solid Lubricanting Coa