基于仿真模板的控制系统可靠性分析.PDFVIP

DOI :10.13700/j.bh.1001 -5965.2004.09.003 2004 9 September　2004 　30 9 ournal of Beijing University of Aeronautics and Astronautics Vol.30 　No.9 王少萍　　陶建峰　　焦宗夏 ( , 100083) 　　　　　:提出面向对象的计算机辅助故障模式影响分析(CFMEA )方法, 建 了控制系统仿真模板, 将其数据、操作和性能封装成一个对象, 对象间通过属性进 行因果推理, 实现FMEA 向故障树(FTA )的自动转换.引入控制系统性能可靠性概 念, 建 控制系统性能和功能综合可靠性模型, 开发相应的解算方法.实例分析证明 了基于仿真模板的控制系统可靠性分析的有效性, 综合了功能和性能可靠性分析的 优点. 　　:控制系统;可靠性;仿真模板;因果推理 :V 241.01 :A 　　　　 :1001-5965(2004 )09-0813-05 Reliability analysis based on simulation modular to control system Wang Shaoping 　Tao ianfeng 　 iao Zongxia (School of Automation Science and Electrical Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China) Abstract :An object-oriented method of computer aided failure mode and effect analysis (CFMEA )was pre- sented.The simulation modular of control system was established, in which the data, performance and mapping re- lation were encapsulated in component model and typical control modular .Through causal reasoning at attribution between objects, it is easy to transfer the CFMEA results into corresponding fault tree so as to realize the reliability analysis for control system.In the control system modeling, the dynamic performance in reliability model was in- ducted, its solution method based on simulation was provided .The application results indicate that the reliability analysis based on simulation modular is effective and easy to combine the advantage of system function and perfor- mance. Key words:control systems;reliability;simulation modular;causal reasoning 　　(FMEA ) , . [1] .