湿法炼锌电解车间设计论文.doc

摘 要 本设计是根据的实际情况，对该厂在原有的生产规模上进行扩建，其扩建规模为本设计的内容主要包括：本设计的重点是电解车间。 本设计所采用的是国内普遍采用的湿法炼锌传统工艺：锌精矿→焙烧→浸出→净化→电积→熔铸→锌锭。 本设计的主要技术经济指标如下： 锌的总回收率：95%； 电解槽电压：3.3V； 总电流强度：25000A； 阴极电流密度：480 A/m2； 电流效率：%； 年工作日：330天； 直流电单耗：3/t。 关键词：湿法炼锌电解 Abstract According to the actual situation of Jinshan Zinc Factory, this design carries on the extension to this factory in the original scale of production, its extension scale is 100,000 t/a. The contents of the design include the choice and proof of technological process, the choice and proof of the main technical and economic index in the electrolysis workshop, metallurgical calculation, the design and arrangement of the electrolysis workshop, the choice and calculation of equipments, comprehensive recovery and environment protection, arrange of the electrolysis workshop and the economy analysis. The key point of this design is the electrolysis workshop. The metallurgical press applied in the design is the conventional process of hydrometallurgy of zinc in domestic: Zinc ore concentrate →roasting → leaching →purification → electrodeposition →casting →zinc spindle. The main economic and technical index of the design were listed as below: 1、The total returns-ratio of zinc: 95% ; 2、The voltage of electrolysis tank: 3.3V ; 3、The total current intensity: 25000A ; 4、cathode-current density: 480 A/m2 ; 5、Current efficiency:% ; 6、Working days of each year: 330 ; 7、The cost of each ton cast of zinc: kw.h/t.Zn. The design is accordance with of the basic principles of design and the national standards and technical specifications,to learn the advanced technology and experience at home and abroad , to select a mature domestic equipment,design of low labor intensity, high efficiency,less environmental pollution. Keywords:the hydrometallurgy of Zinc, electrolysis, workshop,design目 录 摘 要 I Abstract II 目 录 i 1 总论 1 1.1 概述 1 1.2 锌的市场分析 2 1.2.1 消费领域 2 1.2.2 消费情况 3 1.2.3 价格分析 4 1.2.4 锌的市场分析 5 1.2.5 我国锌产品结构调整方向研究 6 1.2.6 综合评估 7 1.3 设计的基本原则