9806H介绍的.pptVIP

EPON 9806H介绍;前 言;What is PON?;Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd.;;Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd.;Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd.;Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd.;Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd.;Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd.;登入设备有两种方式：串口线超级终端登陆设备，默认设置电脑里的超级终端即可 网线直连9806H的网口，将电脑的地址设置为10.62.5.100 255.255.255.0 9806H设备的地址是 10.62.5.101 ，登入设备 telnet 10.62.5.101 输入用户名，密码 admin admin enable admin 9806#erase configuration //删除配置文件，如果有配错的，可全部删除，重新来过 9806#reboot //删除后要重启才能生效 ;9806#con //进入config模式 9806(config)#pon sn O606Z01204010001000 //配置SN号 9806(config)#add-vlan 20,3599 //创建管理VLAN 20和语音VLAN 3599 9806(config)#vlan 20,3599 5/1-2 tag //将管理VLAN和语音VLAN添加到上联口 9806(config)#ip subnet 10.84.226.29 255.255.255.128 20 //创建管理IP地址 9806(config)#ip subnet 10.81.66.29 255.255.255.128 3599 voip //创建语音IP地址 9806(config)#ip route 0.0.0.0 0.0.0.0 10.81.66.126 //把全0的缺省路由指向管理网关 9806(config)#ip route 10.95.255.0 255.255.255.0 10.81.66.126 //把软交换BAC的路由指向语音网关; 9806(config)#snmp-server host 10.10.10.8 //配置服务器地址 9806(config)#loop-check interval 20 //配置换回检测时间 9806(config)#uplink-mode cascade master-port 5/1 //配置上联口模式为级联 9806(config)#qos voip-cos 4 //设置语音优先级为4 9806(config)#time 2009-03-05 12:12:12 //设置时间 9806(config)#interface gigabit-ethernet 5/1 //进入上联口 9806(cfg-if-ge-5/1)# pvid 4088 //设置设备内部通讯PVID (PVID为Port Vlan ID，也就是端口的虚拟局域网ID号，关系到端口收发数据帧时的VLAN TAG 标记 ) 9806(cfg-if-ge-5/1)# exit 9806(config)#exit