塑料模具DFM.pptVIP

Customer (客户): Model (型号): Part Name (产品名称): Part No (产品编号): Material (产品材料): BASF Luran S778T(ASA) Mold Type (2/3板模): 2Plate Gate Type (入水方式): 2 drops hot tip + Hot manifold Cavity No.(出模数): 1+1 Design (编 制): Original Date (制定日期): Version(版本) : A1 1.Gating Point A – A A A 0.5mm 热咀进胶点 2 Hot Tip 3mm Coreside of injection point add plastic of 0.5mm 2a. Parting line P/L CAV COR P/L CAV COR P/L CAV COR 2b. Slider parting line 2c. Lifter parting line 2d. Inserts parting line Inserts Insert PL. Areas to be place insert indicated by square boxes 3. Cavity side structure. Inserts Inserts（8X） 4. Coreside structure. Inserts Inserts（6X） 5.Tool Structure. Sliders Slide 1 Slide 3 Slide 2 Slide moving direction Slide1 Slide 2 Slide 3 6. Tool structure -Lifters Lifter 1 Lifter direction Lifter 2 Lifter 3 Lifter 1 Lifter 2 Lifter 3 7. Ejector pins ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 8a. Issues Insert would be thin steel here. Suggest to reduce plastic on parts to avoid this. New drawing Old drawing 8b. Issues Inserts will be thin steel here. Suggest to reduce plastic on parts to avoid this. 修改后 修改前