06 短行程Synchro传动器 安装规范 Short travel.pdfVIP

Synchro transmission « Short travel » SYNCHRO 传动器 « 短行程 » Installation specifications 安装规范 Date: 29/10/2009 Rev A : Creation of the document (By:RR) Date: 10/03/2010 Rev B : Modification of the cable travel specs. (By:RR) Date: 15/04/2010 Rev C : Update (By:CJ) Date: 29/04/2010 Rev D : Modification of the clutch travel and check after assembly (By:CJ) All information contained in this document is confidential and proprietary to General Transmissions. No license, expressed or implied, under any patent, copyright or trade secret right is granted or implied by the conveyance of this document. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, translated into any language or computer language, in any form by any means electronic, mechanical, magnetic, optical, chemical, manual, or otherwise without the prior written permission of General Transmissions. GENERAL TRANSMISSIONS ® This document is our property. It cant be used, duplicated or 1/14 given to third parties without our written authorization 1°) Characteristics of the T/M Synchro “Short travel” : “短行程”SYNCHRO 传动器特性： Travel of the clutch lever on transmission: 传动器拉杆行程 ● 20 mm Mini 最小20毫米 ● 25 mm Maxi 最大25毫米 Force at the clutch cable:离合缆线拉力 ● 145N ±35N to engage 啮合力：145±35N ● ~ 45 N to maintain engaged 保持啮合力：~ 45N Available Ratio: 可实现减速比：