基于蓝牙的遥控台灯探究.doc

本 科 毕 业 设 计（论 文） 基于蓝牙的遥控台灯设计 学 院（系）： 信息与通信工程学院 专 业： 通信工程 学 生 姓 名： 学 号： 指 导 教 师： 评 阅 教 师： 完 成 日 期： 2015年6月12号 摘 要 在日常生活中常常遇到以下情况：躺在床上看书或者出门忘记关灯，或者夜晚回到家的时候希望能够尽快的找到灯的开关，又或者由于天气寒冷或身体疲惫等愿意不愿意下床关灯等，这些都是现实生活中本设计遇到的比较不方便的事情。为了解决以上问题，本设计想如果能够利用现在较为先进的无线技术来实现电灯的开关闭，就会使本设计的生活变的更加的方便。随着Abstract In daily life often encounter the following: lying in bed reading or out forgot to turn off the lights, or night back to home to as soon as possible to find the light switch, or due to the cold weather or physical fatigue and willing to do not want to get out of bed lights, etc., these are reality life in this design meet the less convenient things. In order to solve the above problems, this design would like to use now more advanced wireless technology to achieve the light off, will make the design of life become more convenient. With the rapid development of the information age, people has been inseparable from the network information, the phone is close with, the design if using a mobile phone to control the lights, the above problems can be solved . This dimming lamp supports mobile phone dimming control of this way, the main chip using STM32 microcontroller, Bluetooth chip using CC2541, this chip supports Bluetooth 4 protocol. This design simulates the LED lamp with the relay above to replace the lamp. Android system and IOS system are available, Android system can download Bluetooth serial assistant software, IOS system can download Lightblue software. The design of the mobile phone Bluetooth send signals and instructions transmitted to the Bluetooth module CC2541, through the STM32 and CC2541 to complete the light of the light. Key Words：STM32；Bluetooth；CC2541；LightBlue；Remote control 目 录 摘 要 I Abstract II 1 绪论 1 1.1 课题研究背景及意义 1 1.1.1 蓝牙技术介绍 1 1.1.2 蓝牙发展现状 1 1.1.3 单片机发展现状 1 1.1.4 课题研究范围 2 1.2 设计思路 2 2 系统方案设计 3 2.1 方案论证 3 2.2 系统及框图说明 4 3 关键芯片说明及硬件电路设计部分 5 3.1 主芯片 5 3.2 蓝牙芯