韩国KNC可燃气体传感器KGS102大全.pdf

KGS 102 The KGS 102 is an SnO semiconductor gas sensor and is 2 used in gas detection, air cleaning system, auto-ventilation system, micro wave oven, etc. In a clean atmosphere, the resistance of the sensor is high. However, with the increase of water vapor or gas concentration in the atmosphere, the resistance decreases. The KGS 102 gas sensor features high stability against air flow, superb response time and excellent durability. Specifications Power Consumption 800 ± 50 mW Heater Current 160 ± 10 mA Heater Voltage AC or DC 5 V Circuit Voltage AC or less than DC 12 V (DC 5V recommended) Load Variable Operating Temp. Humidity -10 ~ 50 , 30~85%RH Storage Temperature -30 ~ 50 Sensor Resistance 20~80 kΩ (in clean air at 25 , 60% RH) Gas Sensitivity 1/3 Rs (CH4 1000ppm)/ Rs (air) 深圳市深国安电子科技有限公司 地址：广东省深圳市龙华新区牛栏前大厦C507 蒋小姐：134 2876 2631 电话：86 755 Detectable Gases Methane, Propane, Butane, Hexane, Gasoline, Acetylene, Hydrocarbons Ethylene, Butylene, Benzene, Toluene, etc. Halogenized Hydrocarbons Methyl Chloride(CH3CI) , Ethyl Chloride, Vinyl Chloride, etc. Alcohols Methanol, Ethanol, Propanol, Butanol, etc.