Itrenzheng 最新CompTIA LINUX+ XK0-002认证题库.pdfVIP

The safer , easier way to help you pass any IT exams. Exam : XK0-002 Title : Linux+ Certification (2004 Objectives) Version : DEMO 1 / 6 The safer , easier way to help you pass any IT exams. 1. At boot time, the computer reported that there are problems with inodes and blocks. Which of the following is the problem and how is it corrected? A. The boot sector is corrupt and needs to be replaced. B. The file system has become corrupt and needs to be repaired. C. The partition table has become corrupt and needs to be repaired. D. The drive is configured using an improper file system and needs to be reformatted. Answer: B 2. Which of the following commands will mount a USB flash drive successfully in Linux? A. mount /dev/sda1 /mnt/usb B. mount -t usbfs /dev/usb001 /mnt/usb C. mount /dev/uda1 /mnt/usb D. mount /dev/hde1 /mnt/usb Answer: A 3. An administrator who logged in as a standard user needs to kill process 1010 that was started by the root user. Which of the following commands will kill the process? A. kill 1010 B. su kill 1010 C. killall -9 1010 D. su -c kill 1010 Answer: D 4. A technician added a PCI network card to a stable Linux server. The server is now generating I/O errors when the kernel module for the network card is loaded. Which of the following actions will solve the problem? A. Disable the power management in the BIOS. B. Move the network card to another available slot. C. Reconfigure the network card to use a different IP address. D. Change the server BIOS setting to disable the network card BIOS. Answer: B 5. A DHCP server has been added to the network. The local system has been reconfigured to connect using DHCP. How could an administrat