选矿机械溢流型球磨机操作维护及检修规程（Rules for operation, maintenance and overhaul of overflow ball mill for concentrator）.docVIP

选矿机械溢流型球磨机操作维护及检修规程（Rules for operation, maintenance and overhaul of overflow ball mill for concentrator） Dressing machine: operation, maintenance and overhaul rules of overflow ball mill The ball mill is part of mineral processing equipment not less than, occupies an important position in the crushing process, the main types are: energy-saving cone ball mill, ball mill, ball mill, tube mill, ball mill and roller bearing. In this paper, Xinhai machinery mainly introduces overflow type ball mill operation, maintenance and repair procedures, convenient user reference ball mill I. operating procedures: 1, before driving to check the mechanical and electrical parts, check whether the connecting bolts loose; the lubricant is normal, whether it is normal for reliable transmission, protection intact, electrical instrumentation is sensitive, good contacts brushless motor. 2, barring a week, the rotation of inspection equipment or obstructions around there, and eliminate. Start around the station were closed. 3, check the error, press the start button to start the motor, pay attention to current changes. Ball mill continuous starting shall not exceed two times, the first and second intervals of more than 5 minutes, if the third start, and electrical and fitter must cooperate with the inspection before starting. Not with other equipment, staggered start, so as not to trip. 4, after the normal operation of the mill, strictly according to the provisions of water supply, ore feeding and steel ball adding, prohibit overload operation, idling time is not more than 15 minutes, so as not to break the lining board. 5, the operation should pay attention to check whether the tank leakage, carefully observe the current, voltage, feed, water supply is normal, every half an hour check the motor and spindle temperature is not greater than 60 degrees, and found problems in a timely manner. 6, to observe the operation of the hollow shaft, oil ring with the rotation oil, hollow shaft temperat