非常全面的结构外观检测(二)（Very comprehensive structural appearance inspection (two)）.docVIP

下载本文档

2
0
约1.82万字
约 21页
2017-09-13 发布于河南
举报
版权申诉

非常全面的结构外观检测(二)（Very comprehensive structural appearance inspection (two)）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

非常全面的结构外观检测(二)（Very comprehensive structural appearance inspection (two)）

非常全面的结构外观检测(二)（Very comprehensive structural appearance inspection (two)） Very comprehensive structural appearance inspection (two) Speaker: China Mobile R D network added date: 2008-3-24 Thanks to 1mp member wangpug for sharing with you! 7 plastic parts inspection Visual inspection of plastic parts is shown in table 4. Table 4 Defective item I measuring surface II measuring surface 11 point defects have color contrast point defect of D = 0.25mm (S = 0.07mm2, N = 1) when D = 0.30mm (S = 0.10mm2, N = 1); when D = 0.25mm (S = 0.05mm2, DS = 15mm) and N D (S = 1.0mm = 2 = 0.8, N = mm2) 2; Point defect without color contrast when D = 0.30mm (S = 0.1mm2, N = 1); when D = 0.25mm (S = 0.05mm2, DS = 15mm) and N is less than or equal to 2 when D = 0.35mm (S = 0.13, N = 1; mm2) when D = 0.30mm (S = 0.07mm2), and DS 15mm = N = 2 Note: when point defect diameter less than 0.10mm and DS is not less than 2mm can be ignored. 2 hard scratch (bumps) D = 0.35mm (S = 0.1, mm2), N = 1; D = 0.4mm (S = 0.13mm2), N = 1; D = 1.0mm (S = 0.80mm2, N = 2); L = 0.5mm, W = 0.2 mm, N = 1 (S = 0.1mm2) L = 0.8mm, W = 0.2 mm, N = 1 (S = 0.16mm2) L = 4mm, W = 0.2 mm, N = 2 (S = 0.8mm2) 3 fine scratches L = 3mm, W = 0.1mm, N = 1 (s = 0.3, mm2) l = 5mm, w = 0.1mm, n = 1 (s = 0.5, mm2) l = 10mm, w = 0.1mm, n = 2 (s = 1, mm2) 4 flash does not allow h to less than 0.10mm and does not affect the assembly of H is less than or equal to 0.20mm and does not affect the assembly 5 shrink reference limit, sample reference limit, sample is not limited 6 welding line reference limit sample reference limit the sample is not limited 7 side tow reference limit, sample reference limit, sample is not limited 8 the warpage shall be limited to the drawing requirements without reference to the drawings 9 color reference limit samples or delta e less than 1 is not limited to qualified 10 top White / top convex is not allowed. No limit is allowed 11 filling insufficient, not allowed, does not affect assembly and function wit