零序滤波器立体结构设计与阻抗计算-电力系统保护与控制.PDFVIP

第44 卷 第11期 电力系统保护与控制 Vol.44 No.11 2016 年 6 月 1 日 Power System Protection and Control Jun. 1, 2016 DOI: 10.7667/PSPC151208 零序滤波器立体结构设计与阻抗计算 尹忠东，王 彬 (华北电力大学新能源电力系统国家重点实验室 (华北电力大学)，北京 102206) 摘要：针对配电网零序电流的特点提出一种三角形立体式结构的零序滤波器。立体式结构中铁芯柱在空间呈三角 形对称分布，相较于传统的平面式结构具有三相对称磁路，解决了三相不平衡问题，并且使得三相零序磁通大小 一致，提高了滤波效果。零序阻抗值是零序滤波器设计的一个重要参数，直接影响到滤波效果。在对零序磁通分 布理论分析的基础上，给出立体结构零序滤波器在ANSYS 中的二维简化模型，并采用能量法对零序阻抗进行数值 计算。最后通过实验验证了该方法的正确性，为立体结构的零序阻抗计算提供了一种有效的工程应用的方法。 关键词：配电网；零序滤波器；对称磁路；能量法；ANSYS ；阻抗计算 Stereoscopic structural design and impedance calculation of zero sequence filter YIN Zhongdong, WANG Bin (State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources (North China Electric Power University), Beijing 102206, China) Abstract: According to the characteristics of the zero-sequence current in the distribution system, a stereoscopic zero sequence filter structure is proposed. The icon cores are symmetrically arranged in a triangular space. Compared to the conventional planar reactor, the triangular structure has a symmetrical magnetic circuit which can solve the problem of the three-phase imbalance and enable three-phase zero sequence flux to be consistent. In the zero-sequence filter, the value of the zero sequence impedance is an important parameter which has a direct impact on the filtering effect. In order to obtain an accurate zero sequence impedance for the structural design, the distribution of the zero-sequence flux is theor