TDK普通单端电解电容B41858.pdf

Aluminum electrolytic capacitors Single-ended capacitors Series/Type: B41858 Date: October 2015 © EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS prior express consent is prohibited. EPCOS AG is a TDK Group Company. Single-ended capacitors B41858 Low impedance  105 °C Long-life grade capacitors Applications Automotive electronics For use in output circuits of switch-mode power supplies of compact design For professional industrial electronics, telecommunications and data processing equipment Features Low impedance at high frequency High reliability Low ESR High ripple current capability RoHS-compatible Construction Radial leads Charge-discharge proof, polar Aluminum case with insulating sleeve Minus pole marking on the insulating sleeve Case with safety vent Delivery mode Terminal configurations and packing: Bulk Taped, Ammo pack Cut Kinked PAPR (protection against polarity reversal): crimped leads, J leads, bent leads Refer to chapter Single-ended capacitors  Taping, packing and lead configurations for further details. Please read Cautions and warnings and Page 2 of 33 Important notes at the end of this document. B41858 Low impedance  105 °C Specifications and characteristics in brief Rated voltage VR 10 ... 100 V DC Surge voltage VS 1.15  VR Rated capacitance CR 22 ... 10000 µF Capacitance tolerance ±20%  M Dissipation factor tan δ For capacitance higher than 1000 µF add 0.02 for every increase of (20 °C, 120 Hz)