catia维标准件库开发与研究说明书.docVIP

毕业设计说明书 基于catia的三维标准件库开发与研究 摘 要 本文在比较分析CATIAV5的几种开发方法，结合国内外标准件库开发现状，建立基于CATIA的三维标准件库方法。本文分析了标准件库任务及目标，构建运行于Windows和CAI，IA两个系统层面上，具有三个基本功能模块的系统框架。 本文根据国家标准分类，设计对标准件的分类选择界面，利用ADO数据库编程将标准件数据读入程序显示在分类选择界面的数据表格中，经过参数检查后传递给CAA自动建模器。本文采用Access数据库，降低了标准件库数据的冗余度，提高了数据的可操作性。 通过对内部结构及运行机制的分析，根据标准件对象的本身特性分类，实现包含螺栓和螺柱、键、销类，二十一个小类的标准件自动建模功能，并完成了标准渐开线圆柱齿轮的参数化建模功能。 在CATIA V5下建立三维标准件库，分二个阶段进行，一是标准件参数化建模，二是利用 CATALOG进行标准件库的集成。具体使用了CATIA的F（X）、Formula、Design Table和Catalog 等功能。 关键词：Catia,标准件库,自动建模 ABSTRACT： Based on the comparative analysis of several development method, CATIAV5 standard part library at home and abroad, based on the development status of 3d CATIA standard part library method. In this paper a standard part library construction, tasks and goals in Windows and CAI, IA two system level, with three basic function modules of the system framework. According to the national standards of fasteners, design of the interface, using ADO choice classification standard database programming will be displayed in the classification of data read program choices, the data interface through parameter table to check automatic modeling CAA. Based on the Access database, reduces the standard library data redundancy, improve the operability of the data. Through the internal structure and operation mechanism analysis, according to the standard of the object itself characteristic classification, contains the bolts and luozhu, key, pin, 21 small class standard automatic modeling functions, and completed the standard involute gear of parameterized modeling functions. Established in CATIA V5 3d standard part library, two phases, one is the standard of parameterized modeling, 2 it is to use standard part library CATALOG for the integration. The specific use of CATIA F (X), the Table is too, and Catalog etc. Function Key words：Catia,,standard catalog, automatic modeling 目录 摘 要 2 一、绪论 5 1、catia的地位及其发展简史 5 2、国内、外标准件库开发的现状 7 3、设计的目的、内容与要求 8 二、总体方案的设计 9 三、标准件参数化建模 10 四、标准件库的集成 14 五、标准件库的使用 15