计量检定员与仪器校准员的区别（What is the difference between the calibration inspector and the instrument calibration staff）.docVIP

计量检定员与仪器校准员的区别（What is the difference between the calibration inspector and the instrument calibration staff） It is necessary to make clear the difference between metrological verification and instrument calibration: In the process of certification audit, some auditors often ask the auditee to deviate from the standard requirements. One obvious manifestation is that the concepts of calibration and verification cannot be distinguished. For example, according to the provisions of the actual needs and Chinas legal metrology management, measuring device organization can meet the requirements of the calibration, and the auditor has opened a unqualified report without verification, organize the implementation of mandatory control according to the calibration, measurement department and forced to organize professional certification, causing large the economic losses to the organization. ISO1OO12 - 1, quality assurance requirements for measurement and inspection equipment standard will be calibration defined as: A set of operations that determine the value of a measuring instrument or measurement system or the relationship between the values represented by a physical measurement or reference material and the corresponding known values measured. Note: 1. calibration results may be used to assess indication errors of measuring instruments, measuring systems, or physical measuring tools, or to mark any mark on a scale; 2. calibration is also available to determine other metering characteristics; 3. records of calibration results can be recorded on documents that are sometimes referred to as calibration certificates or calibration reports; 4, sometimes the approval results are expressed as correction values, calibration factors, or calibration curves. ISO / IEC guideline 25 - 199O General requirements for technical capability of calibration and inspection laboratory: Verify the conformity of the requirements by providing evidence (ISO 84O2 / DADI - 3.37) and add notes to the pu