风杯式风向风速表（Wind cup anemometer）.docVIP

风杯式风向风速表（Wind cup anemometer） Wind cup anemometer wind speed indicator Range of wind speed measurement: 0 - 30m/s Starting wind speed of wind sensor: 0.8m/s Wind speed measurement accuracy: + (0.3+0.03 * V) m/s (V actual wind speed) Velocity parameters can be displayed: the instantaneous wind speed, the average wind speed, instantaneous wind speed, the average wind speed, the corresponding wave height Display resolution: 0.1m/s (wind speed) The 1 level (scale) 0.1M (wave height) Wind cup type anemometer; environmental indicator Working environment temperature: -10 DEG C - +45 DEG C Working environment humidity: less than 100[%]RH (condensation) Power supply Supply voltage: 4.5V 5#, dry battery 3 The average power consumption current: less than 5mA (4.5V power supply) Outline size and weight Shape size: 400mm * 100mm * 100mm Weight: 0.5Kg Working principle of wind cup anemometer 1 part of the wind direction: The part is supported by a wind protection cup retainer. The wind vane, composed of shaft and wind dial, installed in the wind direction on the disc magnet and wind scale magnetic compass is used to determine the wind direction. When the tray nut is rotated under the housing of the wind wheel plate, the tray lifts or releases the wind direction to the disk so as to leave or contact the conical bearing and the shaft tip. The direction of the wind is determined by the direction of the wind pointer at the steady position of the wind wheel. 2 wind speed The traditional three cup rotating frame structure is adopted in the wind speed sensor. It linearly changes the speed of the wind to the speed of the rotating frame. In order to reduce the starting wind speed, the wind light plastic cup, cone bearing support. There is a fixed blade dentate in rotating frame on the shaft, when the rotating frame in the wind rotation, the shaft drives the blades, blade dentate cutting beam in the optical path to the photoelectric switch, which will speed linear transform into the output