威德福液压震击器手册.pdfVIP

Drilling Tools ® Dailey Hydraulic Drilling Jar Weatherford’s Dailey hydraulic drilling jar (HDJ) is a double-acting hydraulic jar designed for simple operation, variable hitting loads, and extended periods of continuous jarring in a wide range of drilling conditions. Using a patented hydraulic time-delay/mechanical-release system, the HDJ combines downhole reliability and long operating life under a wide range of drilling conditions and hostile environments. Applications • High-angle drillstrings • All conventional oil and gas wells • Deviated oil and gas wells Features, Advantages and Benefits • The one-piece involute spline mandrel provides maximum torque with minimal backlash to ensure effective transfer of drillstring torque through the HDJ. Full torque in either direction can be transmitted at all times without affecting the magnitude or the time delay of the jarring operation. The splines and all other working parts of the tool are enclosed within the hydraulic chamber, where they are fully protected and lubricated. • A fluid-isolated, high-pressure chamber lubricates and isolates the HDJ’s moving seals, impact shoulders, and mandrel from downhole debris, protecting the HDJ’s operational integrity. • The HDJ is virtually unaffected by downhole temperatures and generates very little heat when in use. The result is a consistent time delay to trip the HDJ, even in deep, high-temperature holes. • The design of this tool allows for zero bleed-off during jarring; therefore the driller does not have to apply any compensation to the brake load. • Overpull is controlled at the surface, enabling the driller to increase or decrease the impact to the stuck point by simply increasing or decreasing the load applied to the jar. • The hydraulic metering mechanism of the HDJ has no moving pa