TB67S109AFNAG(CPEL 大功率驱动芯片之王.pdfVIP

TB67S109AFNAG TOSHIBA BiCD Integrated Circuit Silicon Monolithic TB67S109AFNAG CLOCK-in controlled Bipolar Stepping Motor Driver The TB67S109A is a two-phase bipolar stepping motor driver using a PWM chopper. The clock in decoder is built in. FNAG Fabricated with the BiCD process, rating is 50 V/4.0 A . Features ・BiCD process integrated monolithic IC. ・Capable of controlling 1 bipolar stepping motor. HSSOP36 ・PWM controlled constant-current drive. Weight TBD (typ.) ・Allows full, half, quarter, 1/8, 1/16, 1/32 step operation. ・Low on-resistance (High + Low side=0.49Ω(typ.)) MOSFET output stage. ・High efficiency motor current control mechanism (Advanced Dynamic Mixed Decay) ・High voltage and current (For specification, please refer to absolute maximum ratings and operation ranges) ・Error detection (TSD/ISD) signal output function ・Built-in error detection circuits (Thermal shutdown (TSD)、over-current shutdown (ISD), and power-on reset (POR)) ・Built-in VCC regulator for internal circuit use. ・Chopping frequency of a motor can be customized by external resistance and capacitor. ・Multi package lineup TB67S109AFNAG: HSSOP36 Note) Please be careful about thermal conditions during use. © 20 16 TOSHIBA Corporation 1 2016-1-15 TB67S109AFNAG Pin assignment (TB67S109AFNAG) Please mount the exposed pad of the HSSOP package to heatsink . 2 2016-1-15