数控g m代码（NC G M code）.docVIP

下载本文档

56
0
约 40页
2017-09-23 发布于河南
举报
版权申诉

数控g m代码（NC G M code）.doc

1、本文档共40页，可阅读全部内容。
2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
5、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
6、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
7、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
8、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

数控g m代码（NC G M code）

数控g m代码（NC G M code） Give you something important! 1, G00 and G01 G00 motion track has two kinds of straight lines and broken lines. This instruction is only used for point positioning and can not be used for cutting G01 moves at a specified speed to the specified target point in a straight line motion, generally used for cutting 2, G02 and G03 G02: clockwise arc interpolation, G03:, counterclockwise arc interpolation 3, G04 (delay or pause instruction) Generally used for positive and reverse switching, processing blind hole, ladder hole, turning groove cutting 4, G17, G18, G19 plane selection instructions, specify plane processing, generally used in milling machines and machining centers The G17:X-Y plane may be omitted, or it can be a plane parallel to the plane of the X-Y G18:X-Z planes or planes parallel to them. In NC lathes only the X-Z plane is not specified G19:Y-Z planes or planes parallel to them 5, G27, G28, and G29 reference point instructions G27: returns the reference point, checking and confirming the reference point location G28: automatically returns the reference point (through the middle point) G28 returns from reference point and is used in conjunction with G29: 6, G40, G41, G42 radius compensation G40: cancel tool radius compensation Give it so much, and make it up in the evening 7, G43, G44, G49 length compensation G43: length positive compensation G44: length negative compensation G49: cancel tool length compensation 8, G32, G92, G76 G32: thread cutting G92: thread cutting, stationary cycle, G76: thread cutting, compound cycle 9, turning processing: G70, G71, 72, G73 G71: axial rough compound cycle instruction G70: finishing compound cycle G72: end turning, radial roughing cycle G73: profiling, roughing cycle 10 、 milling machine and machining center: G73: high speed deep hole peck drilling G83: deep hole peck drilling G81: drilling cycle G82: deep hole drilling cycle G74: left handed thread processing, G84: right-hand screw machining, G76: pr