质子交换膜燃料电池的动态模式估测与控制系统设计-高苑科技大学.pdfVIP

高苑學報‧第十六卷第一期(2010/3) ‧第61～80 頁‧61 The Dynamics Model Estimation and Control System Design for the Proton Exchange Membrane Fuel Cell Zheng-Xian Hong 1, Pang-Chia Chen 2*, and Jui-Lung Hsu 3 Department of Electrical Engineering, Kao Yuan University, Kaohsiung, Taiwan, R. O. C. E-mail: patsu@cc.kyu.edu.tw Abstract This paper is on the study of controller design for the proton exchange membrane fuel cell. In the Labview platform, investigate the graphic approach to control the gas flow quantity that provided to the fuel cell. First, using the rectangular doublet pulse as testing input signal, by measuring the data of input hydrogen flow and output voltage, we calculate and obtain the parameter estimation for the assumed second order time-delay fuel cell system dynamics by Taguchi method. Next, according to the dynamic characteristics of the obtained fuel cell model, the proper PID controller is designed. Then, the fuel cell dynamics and designed PID controller are implemented in the MATLAB/Simulink environment to perform controlled system simulation. Also, based on the PID control structure, an extra feedward control signal is supplemented to improve the tracking performance for external voltage command. Keywords: PEMFC, Taguchi method, Parameter estimation, PID control 62 ‧質子交換膜燃料電池的動態模式估測 與控制系統設計 質子交換膜燃料電池的動態模式估測與控制系統設計 洪政賢 1 陳邦家 2* 徐瑞隆 3 高苑科技大學電機工程系 E-mail ：patsu@cc.kyu.edu.tw 摘 要 本文以質子交換膜燃料電池的控制器設計作為研究對象，在 Labview 平台的圖 控環境下，探討藉由調節供應至燃料電池的氣體流量的方式，以控制燃料電池，得 到適當的輸出電壓。首先，採用矩形雙脈波的輸入測試訊號，藉由量測燃料電池的 輸入氫氣流量與輸出電壓的相對數據，以