CAT2520泵组系类.pdfVIP

原装美国进口泵 Model: 3520 Technical Specifications ①⑤③⑨⑥⑤⑦⑥①⑦② Model: 7595 High Flow Relief Valve Technical Specifications 流量Max Flow: 53 gpm 压力Min Pressure: 100 psi Max Pressure: 2600 psi 进口尺寸Inlet Port Size: 3/4NPT(F) Discharge Port Size: 1/2NPT(F) Type of Accessory: Relief / Pop-Off Valve 材质Material: Brass (BB) This is a secondary protection device that should be installed in addition to the primary pressure regulator or unloader. It is typically set approximately 200 PSI above the system pressure set on the primary valve. It offers additional protection to the pump and is recommended in larger capacity and higher pressure systems. Model: 7108.8Inlet Filter 流量Max Flow: 60 gpm 压力Min Pressure: 0 psi Max Pressure: 70 psi 进口大小Inlet Port Size: 1.5 Discharge Port Size: 1.5 Type of Accessory: Inlet Filter 材质Material: N/A The inlet filter is designed to filter the liquid before entering the pump. It easily mounts in-line at the pump inlet. The standard 80 mesh is adequate for normal city water and supply tank filtering. This version has a clear body for easy detection of a clogged filter. Additional filtration is necessary for reclaim and non-water liquids. 进气过滤器是过滤液体进入泵前。它很容易安装在泵的入口。标 准80 网格是足够的正常供水和供水箱过滤。这个版本有一个简单明 确的身体检测过滤器堵塞。额外的过滤回收和非水液体的必要。 ①⑤③⑨⑥⑤⑦⑥①⑦② Flexible hose should be installed at the inlet of the pump. If supp