VID6606 步进电机驱动手册.pdfVIP

Type:VID6606 Stepper Motor Driver Revision: 1 (For four motors) Page:1/6 A Company of Wellgain Group STEPPER MOTOR DRIVER VID66-06 GENERAL DESCRIPTION GENERAL DESCRIPTION The quad stepping motor driver VID66-06 is a monolithic CMOS device intended to be used as an interface circuit to ease the use of the stepper motor VID29-XX. It is specifically designed for applications in the car dashboard. The chip allows the user to drive four motors as it contains four identical drivers on the same chip. The driver circuit converts a pulse train f(scx) into a current level sequence sent to the motor coils. This sequence is used to produce the micro stepping movement of the motor. Each inner driver in the chip generates 2 sequent logic pulse signals and provides shaft stepping angle resolution 1/12°. FEATURES FEATURES Generates micro steps Glitch filters on all inputs VDD = 4.5 to 5.5V Low EMI emission APPLICATIONS APPLICATIONS Car dashboard Nautical instrumentation Nautical instrumentation Aeronautical instrumentation Appliance controls Devices for medical analysis © 2005 Data Instrumentation Technology E-mail: @ Website:/ Type:VID6606 Stepper Motor Driver Revision: 1 (For four motors) Page:2/6 A Company of Wellgain Group TYPICAL OPERATING CONFIGURATION TYPICAL OPERATING CONFIGURATION RESET OUT f(scx)A A CW/CCWA