克隆aix操作系统（Clone AIX operating system）.docVIP

克隆aix操作系统（Clone AIX operating system） Clone the hard disk (install the operating system directly on the same type of minicomputer): ------------------------------------------- #/usr/sbin/alt_disk_install - OBC hdisk3 # diag / / have good off the hard disk hdisk3 clone Smit, VG, exportvg, delete alt_rootvg Activate Lpar 4, then select SMS, select the boot sequence, and find the SCSI HARD DISK that contains the clone system. HACMP: actually, its HACMPs clvm problem. Clvm also requires the machine to have a unique, legitimate ID, The cloned machine either reinstalled the cluster.es.clvm.rte, Either manually regenerate the ID. Clone hard disk: AIX clone method in Lpar (partition) environment: ----------------------------------------- 1., do a system in a partition, install the software. In this case, the Lpar 1 and Lpar 2 systems are already in place. Among them, Lpar 1 is the AIX operating system, and Lpar 2 is the AIX operating system and application software. There are 4 hard disks in the two systems, of which hdisk0 is rootvg and the rest are unused 2. do system cloning in Lpar 1 and Lpar 2, respectively. 3. cloning first system with the bos.alt_disk_install.rte file set (which can be found in the operating system, the first installation CD # Smitty installp can be installed.) 4. take Lpar 2, for example, to verify that disk usage is correct and execute the clone command # /usr/sbin/alt_disk_install - OBC hdisk3 / / to clone #... / / 20 minutes, the end of cloning # lspv Hdisk0 xxxxxxxxxxxxxxxxxxx rootvg Hdisk1 none none Hdisk2 none none Hdisk3 xxxxxxxxxxxxxxxxxxx altinst_rootvg This shows that the successful cloning of hdisk / 3, are mounted in other partitions, VGname automatically renamed rootvg # /usr/sbin/alt_disk_install - V alt3 hdisk3 / / VGname by altinst_rootvg hidsk 3 (default) to alt3, the purpose of doing so is convenient to continue making the following cloning machine. Avoid system errors: this VGname already exists. # diag / / have good clone transfe