装配钳工中级试题（Fitter intermediate test）.docVIP

装配钳工中级试题（Fitter intermediate test） 1., the substance of professional ethics is (C). A, improve personal life, B, and increase the wealth of society C, establish a new socialist attitude towards labor, D and enhance the sense of competition 2. violation of safety procedures is (A). A, formulate the production process, B and implement the rules and regulations of safety production C, strengthen the concept of legal system, D, and enforce the laws and regulations on national safety in production 3., not consistent with the requirements of clean, civilized production requirements (C). A, implement operating procedures, B, implementation rules and regulations C, the work is not required for clothing, D, and create good conditions of production 4. the error in the following statement is (C). A, for the parts of the ribs, spokes and thin-walled, such as longitudinal cutting, these structures are not painted cross section symbols, But it will separate the adjacent parts with thick lines. B, when the structure of the rib, spoke and hole on the revolving part of the component is not in the cutting plane, these structures can be rotated to the plane of cutting and drawn C, the longer parts (shafts, rods, profiles, connecting rods, etc.) in the direction of the length of the same shape or change according to certain rules, it can be broken to shorten the drawing. When using this drawing method, the size can not be marked by the original length of the machine D, when a plane on a revolving part cannot adequately represent a plane in a graph, it can be represented by plane symbols (two fine solid lines intersecting) 5. to determine the basic deviation, mainly to determine (A). A, tolerance zone location, B, tolerance zone size C and matching accuracy D, workpiece processing accuracy The structure of 6. ductile iron can be (B). A, ferrite + group, flocculent graphite, B, ferrite + spheroidal graphite C, ferrite + pearlite + flake graphite, D, pearlite + flake graphite 7. the accur