ta7698引脚功能（Ta7698 pin function）.docVIP

ta7698引脚功能（Ta7698 pin function） The TA7698 pin functions measured data Black test (k), red test (k), voltage (V), pin, function pin, function pin voltage (V), red test (k, K) 1.9, 1.9, 7.042, after contrast control of video signal contrast control, high frequency lifting 14.2 ~ 3.9, 0.4, 0.4 6.8, 8.7, 6.8 to 7.241 contrast control, Vcc power supply voltage 2121.1, 1.1 2.2, 2.2740, full television signal, inverted phase output, Y signal, black level, clamping input, 33.7 to 4.2, 8.8, 6.3 2.1, 2.1, 3.839, all TV input brightness control 43.6 ~ 4.28, 6.2 6.5, 8.2, 0.838 lines, reverse pulse input, chroma signal input 51, 5.15 467.7, 0.537 synchronous separation, input ACC filter 678.8, 6.2 106.6336 sync separation output: color sync strobe pulse forming timing color saturation control 72.7 to 6.9 (0.8) 8.8 6.2 7.650, 4.635, AFC output chroma signal output 88.6 ~ 9.7, 2.5, 2.4 6.110534 line oscillation: line synchronization controls hue control 95.697 2.83, 8.433 lines start power, color sync pulse, tune 107.4, 9.1, 5.5 4.4, 4.7, 0.432 lines of pre excitation signal output 11000 00031 wire line scanning achromatic filter 128.9 (6.5) 86.1 recognition 00030 X ray protection control input 4.43 crystal oscillator drive 139, 6.57 78.8329 oscillating sub carriers 45 degrees input 143.4, 8.1, 6.5 8.78 -0.2 28 field sync signal input subcarrier 0 degrees input 153.4, 8.1, 6.6 6.39, 6.827 field sawtooth formation subcarrier APC filter 16896 6.5, 8.1, 7.126 field AC / DC negative feedback input, direct chrominance signal input 1749.67 6.5, 7.3, 3.825 field adjustment subcarrier APC filter 18896 0.4, 0.4, 0.824 field drive output delay chrominance signal input 1948.17 6.1, 7.2, 6.523, after contrast and brightness control, the Y signal output G-Y, output 207.3, 2.7, 2.8 2.8, 2.7, 7.322, B-Y output, R-Y output, 217.3, 2.7, 2.7 Note: the value of voltage in parentheses is measured when there is no signal. The road resistance value of R * 1K block measurement in Furi tv. ? The fault