不锈钢玻璃隔断（Stainless steel partition）.docVIP

不锈钢玻璃隔断（Stainless steel partition） Construction process of stainless steel glass partition First, construction preparation, 1.1 materials, components and fittings, glass partition adopts 12mm toughened glass material, processed in glass factory, finished double glazing partition. 1.2 main machine tools: electric hammer, cutting machine, argon arc welding machine. Tools: tap, screwdriver, glass glue gun, etc. Second, process glass partition wall safety construction procedures: measuring wire release - material order - upper and lower parts of steel installation - Installation of glass - Installation of stainless steel - Coating - cleaning. 2.1 measurement line: according to the design drawing size measurement line, measured the base line of position elevation, glass wall of the central axis and the upper and lower parts of 50*100 steel tube; 2.2 fixed iron and steel pipe welding: according to the design drawings of the size of fixed parts with expansion bolts fixed, and then the 50*100 steel pipe. Adjust flat, then weld fixed. All stainless steel parts painted anti rust paint; 2.3 glass block installation positioning and stainless steel plate: 12mm tempered glass plate, all in professional manufacturers custom-made, shipped to the site. The glass block is clean, the rubber pad is positioned on the steel pipe, fixed with stainless steel tank, glass installation machine or checked the sucker will be placed in the glass block mounting groove, leveling, vertical fixed, with a glass wall all the installation and adjustment, vertical to the installation of stainless steel plate; 2.4 glue injection: first clean the upper and lower parts, side glass and glass groove seam glue injection, and then glue on both sides of the glass, stainless steel plate glue white tape, glue injection leave seam position, the national requirement of glue injection, the same seam disposable end note scraping, do not stop. (Note: a glue injection joints must be dry before glue injection, avoid moi