仪表巡检（Instrument inspection）.docVIP

仪表巡检（Instrument inspection） First, do a good job in Japan tour inspection + c: K (I: DA4 J6 Z5 S T9 B Instrument workers generally have their own range of instrument inspection, according to the distribution of the instrument under the circumstances, select the best patrol route, inspection at least two times a day. During the circuit check, the instrument operator should know the operation of the instrument on the spot and deal with the problems in the operation of the instrument. E4 ^2% d0?! K/! U6 a, H V (instrument inspection, mainly for the following items: (A6 J% F5 U R3 _ |+? 4. 1, check the instrument instructions, records are normal, the scene of a meter and control room display instrument, adjustment instrument indication value is consistent, regulator output indication and control valve position is consistent. 0, Q0, R/, Q6, U, K, R, R7, n 2. Check the instrument power supply (AC220V or DC24V) and whether the air source (0.14MPa) is in the normal range. M*, n%, c$, f%, p/, Z#, ~5, / N3, check instrument insulation and heat tracing.. W.. K; B [1 x, |! @9 F 4. Inspect the instrument body and fittings for damage and corrosion. V- SL / N) ^+ 5, check the instrument and process interface leakage. G, a, ~5, H8, X%,]0, W 6. Check the instrument in good condition. The condition of the instrument in good condition may be checked with the regulations of equipment maintenance and repair issued by the Ministry of chemical industry. 4, Q, j, R7, I3, J, W1, P7 \ O two, do a detailed sewage plan, regular blowdown Q- J (K# T) ` regular blowdown is mainly aimed at easy condensing, easy crystallization and easy deposition media instruments. This work should be in accordance with local conditions, and not all process inspection instruments need regular blowdown. 3]* U1 f/ ZR. g- P1, {; P g C$M2 6 emission P S The sewage is mainly for the differential pressure transmitter, pressure transmitter, float level gauge and other instruments, as measured medium containing dust, grea