UserGuide清洗水控制系统用户手册-Solumetrix.PDF

RM-33 Rinse Water Control System User Guide 清洗水控制系统 用户手册 2012年6月 Contents 内容 1 Introduction 简介 2 Principles of rinse water control using conductivity :- FAQs 清洗水控制 导电原理：常见问题 3 Installing the RM-33 RM-33的安装 4 How the RM-33 operates 如何操作RM-33 5 Setting the RM-33 to suit your process 设置适用于你过程的RM-33 6 Specifications 规格 7 Options 可选配件 8 Safety precautions 安全预警 9 Block diagram 简图 Section 1 第一章 Introduction简介 The RM-33 is a precision instrument that uses the latest contact-free electrodeless sensor technology to control the use of rinse water. The control of rinse water gives the following important advantages:- Lower, more consistent water usage and cost. More consistent chemical concentration in tank outflow resulting in simpler water treatment process control. Lower operator intervention needed to suit changing work patterns. The RM-33 is a complete rinse water control system kit including everything required to control the rinse water in a single swill tank. The kit comes pre-wired and installation time has been reduced to a minimum. A specially designed polypropylene encapsulated conductivity sensor is used to measure the concentration of chemical contamination in the rinse tank, and a rugged solenoid valve is used to regulate the flow of water. The volume of rinse water flow is measured with an integrated digital flow meter. The system uses low 24 volt power to operate the controller and solenoid valve, so that the maximum safety benefits can be gained from use in the plating environment. RM-33 是采用最新无接触电极传感技术来控制清洗水的精密仪器。这个控制方式有以下几 个优点： 1）更连续的用水和低成本； 2 ）使槽内药液更能连续流出，致使水处理控制过程更为简便； 3 ）更少操作干预，适用于变化的工作模式； 4 ）RM-33是一个完整的清洗水控制系统工具包含一个独立冲洗槽所需的一切。这工具使得预接 线和安装时间降到最少； 5 ）配有一个特别的聚炳烯封装导电传感装置用于测量清洗槽的药液浓度，同时配置电磁阀用于 调整水流； 6 ）配有集成数字流量计以测量清洗水的流量； 7 ）这系统采用低压24V 以操控控制器和电磁阀，以便提高电镀环境的安全性。 Section 2第二章 Principles of rinse water control using conductivity FAQs 清洗水控制导电原理：常见问题 2.1 What is conductivity? 什么是导电率 The conductivit