3D打印个体化矢状曲度模棒和椎弓_省略_航模板在胸腰椎骨折脱位术中的应用_吴超.pdfVIP

2015 11 29 11 • 1381 • 3D3D 643000 3D 2011 2 2013 11 42 24 18 3D Frankel P0.05 Frankel P0.0512 40 22 P0.05 P0.05 2 2 χ χ =9.38P=0.00 =10.95P=0.00 t=13.43P=0.00 P0.05 Frankel Z= — 1.99P=0.04 3D Frankel 3D CLINICAL APPLICATION OF INDIVIDUALIZED REFERENCE MODEL OF SAGITTAL CURVES AND NAVIGATION TEMPLATES OF PEDICLE SCREW BY THREE-DIMENSIONAL PRINTING TECHNIQUE FOR THORACOLUMBAR FRACTURE WITH DISLOCATION WU Chao, TAN Lun, LIN Xu, HU Haigang. Department of Orthopedics, the Fourth People’ s Hospital, Zigong Sichuan, 643000, P.R.China. Corresponding author: TAN Lun, E-mail: 1098726536@ Abstract Objective To evaluate the clinical significance of individualized reference model of sagittal curves and navigation templates of pedicle screw by three-dimensional printing technique for thoracolumbar fracture with dislocation. Methods Between February 2011 and November 2013, 42 patients with thoracolumbar fracture and dislocation undergoing pedicle screw fixation were divided into 2 groups: traditional pedicle screw internal fixation by fluoroscopy assistant was used in 24 cases (control group), and individualized reference model of sagittal curves and navigation templates of pedicle screw were used in 18 cases (trial group). There was no significant difference in gender, age, injury causes, segment, degree of dislocation, and Frankel classification between 2 groups (P0.05). The operation time, intraoperative blood loss, perspective times, and dislocation rate, sagittal angle recovery rate at different time were compared. The success rate of pedicle s