CC254x_CC2540_CC2541库函数速查.pdf

CC254x/CC2540/CC2541库函数速查 hci.h //分配内存,应用程序不应该调用这个函数. void *HCI_bm_alloc( uint16 size ); //检查连接时间参数和连接时间参数的组合是否有效 uint8 HCI_ValidConnTimeParams( uint16 connIntervalMin, uint16 connIntervalMax, uint16 connLatency, uint16 connTimeout ); //HCI vendor specific registration for HCI Test Applicationvoid HCI_TestAppTaskRegister( uint8 taskID ); // HCI vendor specific registration for Host GAP. void HCI_GAPTaskRegister( uint8 taskID ); //HCI vendor specific registration for Host L2CAP. void HCI_L2CAPTaskRegister( uint8 taskID ); //HCI vendor specific registration for Host SMP. void HCI_SMPTaskRegister( uint8 taskID ); // HCI vendor specific registration for Host extended commands. void HCI_ExtTaskRegister( uint8 taskID ); //发送一个ACL数据包 hciStatus_t HCI_SendDataPkt( uint16 connHandle, uint8 pbFlag, uint16 pktLen, uint8 *pData ); //中断连接 hciStatus_t HCI_DisconnectCmd( uint16 connHandle, uint8 reason );//请求得到版本信息 hciStatus_t HCI_ReadRemoteVersionInfoCmd( uint16 connHandle ); //设置消息蒙版,确定支持哪些消息 hciStatus_t HCI_SetEventMaskCmd( uint8 *pMask ); //重置连接层 hciStatus_t HCI_ResetCmd( void ); //读取发射功率 hciStatus_t HCI_ReadTransmitPowerLevelCmd( uint16 connHandle, uint8 txPwrType ); //主机用来开关流量控制(控制器法向主机的) hciStatus_t HCI_SetControllerToHostFlowCtrlCmd( uint8 flowControlEnable ); //ThisBT API isused by theHost tonotify theController of themaximum sizeACL buffer size the Controller can send to the Host. hciStatus_t HCI_HostBufferSizeCmd( uint16 hostAclPktLen, uint8 hostSyncPktLen, uint16 hostTotalNumAclPkts, uint16 hostTo