OB2263(无水印版).pdf

OB2263 Current Mode PWM ControllerFrequency Shuffling Tone energy at below 20KHZ is minimized in the GENERAL DESCRIPTION design and audio noise is eliminated during operation. OB2263 is a highly integrated current mode PWM OB2263 is offered in SOT23-6, SOP-8 and DIP-8 control IC optimized for high performance, low packages. standby power and cost effective offline flyback FEATURES converter applications in sub 30W range. PWM switching frequency at normal operation is ■ On-Bright Proprietary Frequency Shuffling externally programmable and trimmed to tight range. Technology for Improved EMI Performance. At no load or light load condition, the IC operates in ■ Extended Burst Mode Control For Improved extended ‘burst mode’ to minimize switching loss. Efficiency and Minimum Standby Power Design Lower standby power and higher conversion ■ Audio Noise Free Operation efficiency is thus achieved. ■ External Programmable PWM Switching VDD low startup current and low operating current Frequency contribute to a reliable power on startup design with ■ Internal Synchronized Slope Compensation OB2263. A large value resistor could thus be used in ■ Low VDD Startup Current and Low Operating the startup circuit to minimize the standby power. Current (1.4mA) The internal slope compensation