美国威景VK系列水雾喷头技术说明.pdf

Page 1 of 13 SOLID CONE TECHNICAL DATA SPRAY NOZZLES The Viking Corporation, 210 N Industrial Park Drive, Hastings MI 49058 Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techsvcs@ 1. DESCRIPTION Viking Model A-2, A-2X, B-2, C-2, and D-2 Solid Cone Spray Nozzles are “non-auto- matic” pattern, open, directional discharge spray nozzles. The spray nozzle units feature two-piece construction consisting of a cast bronze body and threaded insert. The insert determines the included angle of discharge and the body construction provides a uniform distribution throughout the discharge pattern. When spraying, the nozzle discharge forms a solid, cone-shaped spray pattern meeting the requirements for medium- and high-veloc- ity water spray systems. Optional dust plugs are available to prevent foreign material from entering the open end of the spray nozzle. They are designed to blow off when the system piping is pressurized. 2. LISTINGS AND APPROVALS cULus Listed: Category VGYZ FM Approved: Water-Spray Systems NYC Approved: Calendar Number 219-76-SA, Bulletin No. 16, Vol. LXI NOTE: International approval certificates are available upon request. The nozzles are approved for use in medium- and high-velocity water spray systems. Refer to the Approval Charts on pages 4-5 and Design Criteria on Solid Cone Spray Nozzles page 6 for cULus and FM approval requirements that must be followed. 3. TECHNICAL DATA