位移传感器折射率测量系统.docVIP

学号： S100200148 硕士学位论文 基于位移传感器的折射率测量系统研究 研究生姓名：侯利杰 学科、专业：光学工程 二○一二年三月 分类号： TN202 密 级： 可公开 U D C： 681.7 编 号： 基于位移传感器的折射率测量系统研究 Research of the refractive index measurement system based on displacement sensor 学位授予单位及代码：长春理工大学 (10186) 学科专业名称及代码：光学工程 (0803) 研究方向：现代光学技术及工程应用 申请学位级别： 硕 士 指导教师： 向阳 教授 研 究 生： 侯利杰 论文起止时间： 2011.9—2012.12 摘 要 对折射率的检测是提高光学仪器质量的前提ABSTRACT The refractive index of the detection is improving the optical instrument quality on the premise, and it is the research of the important parameters of the imaging quality of the optical system . This paper designs a new refractive index measurement method and device ,and it is based on the principle of optical imaging , using of optical flat panel imaging rule , finding the relationship between the measured index of refraction and system optical components of focusing amount, the relationship of the traditional refractive index and the angle is transformed into the relationship of the refractive index and the axial displacement, simple measuring method ,non-contact measurement, and it is set to the integration of optical, machine, electric of high performance precision measuring instruments. Firstly this paper introduces the working principle of the refractive index measurement system, and designed the optical system by using Zemax. This system used three piece photographic objective lens system, the effective focal length of the system is 45mm, the F number and the full field of view angle are 4 and 8° respectively. The image sensor of the lens is 1/3 inch CCD, whose pixel size is 6.35um×6.35um, according to the functional qualities of the apparatus, the system meets the requirement. Next, this paper details the precision machinery structure ，and gives the design results , finally , analysis the error precision. The precision of the system can