丛运辉毕业设计初稿docdeflate.docVIP

摘要 钱家营矿业分公司位于河北省唐山市丰南区钱家营镇，地理坐标为北39°33′。本文设计对象为年产240Mt矿井的第一水平运输大巷，服务年限为75a。 本设计主要对钱家营煤矿运输大巷进行断面设计，其中主要设计内容包括：开挖断面结构设计、锚杆参数、炮眼参数和爆破参数的确定，施工组织设计与工程概算的计算。在设计过程中得到的主要结论包括：断面采用半圆拱结构，掘进宽度为4640mm，掘进高度为3840mm。采用锚喷网支护，选用树脂锚杆，杆体为Ф18mm螺纹钢，每孔安装两个树脂药卷，锚杆长度2.0m。选择混凝土标号为C20，喷射混凝土层厚度T1=120mm。钢筋网由钢筋焊接而成钢筋直径Ф为6mm，网格为120mm120mm。采用全断面开挖，施工方案采用钻爆法施工，炮眼共65个，炮眼深度为1.9m，周边眼直径Ф为32mm，其他Ф为36mm。采用气腿凿岩机和耙斗装岩机的机械化作业线，作业方式为掘支平行作业，采用三班工作制，一天三个循环，每一循环进尺为1.9m,故月进度可达到57m左右。 关键词：运输大巷；结构；锚喷网；钻爆；施工组织 Abstract Qianjiaying Mining Company located in Tangshan City, Hebei Province, Qian Ying Town Fengnan area, geographic coordinates for the North 39 ° 33 . This object is designed annual output of the first level of 240Mt coal mine roadway transportation, length of service as 75a. The design mainly Qianjiaying roadway for coal transport section design, in which the main design elements include: excavation cross-section design, bolt parameters, borehole parameters and the determination of blasting parameters, construction design and engineering budget calculations. In the design of the main conclusions obtained in the course include: cross-section semi-arched structure, excavation width of 4640mm, excavation height of 3840mm. Net support with shotcrete, the choice of resin bolt, screw rod is Ф18mm, each installation of two resin Cartridge hole, bolt length 2.0m. Selected for the concrete grade C20, the thickness of shotcrete T1 = 120mm. Welded steel mesh of reinforced steel bar diameter Ф is 6mm, the grid is 120mm 120mm. Using full-face excavation and construction drilling and blasting method using the construction program, a total of 65 blast-hole, shot hole depth is 1.9m, around the eye diameter Ф is 32mm, other Ф is 36mm. And the use of air-leg rock drill rock rake bucket loading machine machine assembly, the operating mode for the excavation support parallel operations, the use of three-shift working system, one of three cycles, each cycle footage is 1.9m, so the progress of up to 57m or so months. Key