v7000基本安装.doc

V7000前后端接口介绍 V7000导轨安装 前端只安装一个螺丁，后端2个 前端螺丁位置 控制柜上架后，装上左右小面板 拧上螺丁 V7000电源线连接 V7000连接扩展柜 初始化V7000 运行USB KEY中的inittool.exe 如果不知道服务助手IP地址，选 恢复出厂设置或者手工定义 装USB KEY插到V7000上的USB口中，等待USB灯不再闪烁。 Satask.txt内容： satask chserviceip -default Satask_result.html内容如下： Service Command Results satask chserviceip -default Sat Jul 16 13:55:30 CST 2011 System Status sainfo lsservicenodes panel_name cluster_id cluster_name node_id node_name relation node_status error_data 01-1 0602C28 v7000 3 node1 local Active 01-2 0602C28 v7000 2 node2 partner Active sainfo lsservicestatus panel_name 01-1 cluster_id0602c28 cluster_name v7000 cluster_status Active cluster_ip_count 2 cluster_port 1 cluster_ip 192.168.1.12 cluster_gw 192.168.1.1 cluster_mask 255.255.255.0 cluster_ip_6 cluster_gw_6 cluster_prefix_6 cluster_port 2 cluster_ip 192.168.1.14 cluster_gw 192.168.1.1 cluster_mask 255.255.255.0 cluster_ip_6 cluster_gw_6 cluster_prefix_6 node_id 3 node_name node1 node_status Active config_node No hardware 100 service_IP_address 192.168.70.121 service_gateway 192.168.70.1 service_subnet_mask 255.255.255.0 service_IP_address_6 service_gateway_6 service_prefix_6 node_sw_version 6.2.0.1 node_sw_build 36.0.1106060000 cluster_sw_build 36.0.1106060000 node_error_count 0 error_code error_data error_code error_data error_code error_data error_code error_data error_code error_data fc_ports 4 port_id 1 port_status Inactive port_speed N/A port_WWPN 5005076802101578 SFP_type Short-wave port_id 2 port_status Inactive port_speed N/A port_WWPN 5005076802201578 SFP_type Short-wave port_id 3 port_status Inactive port_speed N/A port_WWPN 5005076802301578 SFP_type Short-wave port_id 4 port_status Inactive port_speed N/A port_WWPN 5005076802401578 SFP_type Short-wave ethernet_ports 2 ethernet_port_id 1 port_status Link Online port_speed 100Mb/s - Full MAC e4:1f:13:74:66:60 ethernet_port_id 2 port_status Not Configured p