SABS60439-5南非标准.pdfVIP

ICS29.130.20;29.240.30 SABS IEC lSBN 0-626-12161-2 60439-5:1998* *This standard references other standards SABS edition 1.1lIEC edition 1.1 Specification Low-voltage switchgear and controlgear bJ assemblies U) - m a Part 5: Particular requirements for assemblies A intended to be installed outdoors in public I places -Cable distribution cabinets (CDCS)for L-A power distribution in networks CO CO 00 Published by THE SOUTH AFRICAN BUREAU OF STANDARDS Amendments issued since publication Amdt No. Date Text affected Obtainable from the South African Bureau of Standards Private Bag X191 Pretoria Republic of South Africa 0001 Telegrams : Comparator, Pretoria Telex : 321308SA Fax : (012) 344-1 568 COPYRIGHT RESERVED Printed in the Republic of South Africa by the South African Bureau of Standards SABS IEC 60439-5 Notice This part of SABS IEC 439was approved by the President of the South African Bureau of Standards on 14April 1997. IEC amendment 1 (1998)was approved according to SABS procedureson 19March 1999.Edition 1 .l of this part of SABS IEC 60439 is a consolidated version of SABS IEC 439-5:1996and its amendment l(l998). NOTES 1 In terms of the Standards Act, 1993 (Act29 of 1993), no person shall claim or declare that he or any other person compliedwith an SABS standard unless a) such claim or declaration is true and accurate in all material respects, and b) the identity of the person on whose authority such claim or declaration is made, is clear 2 It is recommendedthat authorities who wish to incorporate