1008材质性能说明.pdfVIP

Designation: A 1008/A 1008M – 05a Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable1 This standard is issued under the fixed designation A 1008/A 1008M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (e) indicates an editorial change since the last revision or reapproval. 1. Scope* A 941 Terminology Relating to Steel, Stainless Steel, Re- 1.1 This specification covers cold-rolled, carbon, structural, lated Alloys, and Ferroalloys high-strength low-alloy, high-strength low-alloy with im- E 18 Test Methods for Rockwell Hardness and Rockwell proved formability, solution hardened, and bake hardenable Superficial Hardness of Metallic Materials steel sheet, in coils and cut lengths. E 517 Test Method for Plastic Strain Ratio r for Sheet Metal 1.2 Cold rolled steel sheet is available in the designations as E 646 Test Method for Tensile Strain-Hardening Exponents listed in 4.1. (n-Values) of Metallic Sheet Materials 1.3 This specification does not apply to steel strip as 3. Terminology described in Specification A 109/A 109M. 1.4 The values stated in either inch-pound units or SI unit