CATIA模具.pptVIP

產品設計、模具設計及製造解決方案 模具設計及製造流程 快速拆模模組 公母模設計 支援曲面及實體 模具設計 * CATIA 應用工程師 賴文章 Article.lai 宏碁集團／展碁國際關係企業 加工製造 2.5 Axis NC 3 Axis NC STL Rapid Protoyping 模具設計 模具設計(MTD) 快速拆模(CCV) 實體曲面混合設計 產品設計 逆向工程 standard interfaces Multi-CAD  模具加工2 ?-3 axis 分析(CAE) 熱力分析 流動分析 翹曲分析 BOM表、模具成本 Mold based Design 成品設計 快速拆模 模具機構模擬 可行性分析 最佳化 3D-2D 資料同步 加工指示書(模具圖) 快速拆模支援曲面或實體的公母模分割及滑塊部位取出 輔助分模線及分模面的建立 自動拆模設計模組 1.可快速的將公母模曲面分開 2.可快速取出滑塊任何方向支曲面 3.可快速編修模面 4.可完整搭配製模工具模組 BOM表、模具成本 模具設計 模具機構模擬 可行性分析 最佳化 3D-2D 資料同步 加工指示書(模具圖) 模流分析 製模工具設計模組 1.內含多家大廠標準模座(Dme,Eoc,Futaba,Hasco,Pcs…. 2.內含多家大廠模具零件 3.可快速插入滑塊,模仁,入子及模具零件 4.可插入任何零件於模座中 5.有快速建立澆口,流道工具 6.可自行設計特殊模座加入模座庫中 7.可自行設計模具零件加入模具零件庫中 End-to-end solutions for productivity in tooling design and manufacture and design of molded, forged and cast parts The already comprehensive and highly productive capabilities for mold tool design and manufacture are further enhanced in CATIA V5R8 to allow rapid assessment of part moldability and assessment of mold complexity. The new Core Cavity Design product supports Design-for-Manufacture with rapid validation of part moldability, identifying parting lines, slider and loose core requirements, to minimize mold tooling costs; With full downstream associativity to the Mold Tool design and NC Manufacturing definitions. For design and manufacture of molded parts the ability to reverse-engineer a 3D model from a physical part can be a critical part in the process. Release 8 introduces a Quick Surface Reconstruction capability, to enable rapid creation of accurate surface definitions from scanned point data, imported with the CATIA Digitized Shape Editor. This will significantly reduce the time “from scan to tool in operation”. The final piece of the molded part process for early part validation is the use of StereoLithograhy (STL) for creation of prototype parts and molds. V5R8 introduces a complete STL interfacing and editing capability, allowing not only import and export, but also significant capabilities