机械科学与技术中英文翻译.docVIP

机械科学与技术中英文翻译 Journal of Mechanical Science and Technology 24 (2010) 145~148 /content/1738-494x DOI 10.1007/s12206-009-1126-5 Optimal injection molding conditions considering the core ?shift for a plastic battery case with thin and deep walls 1,*2 3Dong-Gyu Ahn, Dae-Won Kimand Yeol-Ui Yoon 1Department of Mechanical Engineering, Chosun University, Gwang-Ju, 501-751, Korea 2 Incheon Service Division, KITECH, Incheon, 406-840, Korea 3Chun-Bok Injection Mold Inc., Gwang-Ju, 1233-12, Korea (Manuscript Received April 24, 2009; Revised September 21, 2009; Accepted October 12, 2009) Abstrac