路自动巡回监测系统方案.docxVIP

-Ⅱ- 天津工业大学 课程设计技术报告 题目：八路自动巡回监测系统设计 学院：机械工程学院 专业：测控082 学生姓名： 指导教师： 摘要 在实际生产和生活等各个领域中，温度是环境因素不可或缺的一部分，对温度进行及时精确的控制和检测显得尤为重要。随着国民经济的发展，人们需要对各中加热炉，热处理炉，生化温室中温度进行监测。采用单片机来对他们控制不仅具有控制方便，简单和灵活性大等优点，而且可以大幅度提高被控温度的技术指标，从而能够大大的提高产品的质量和数量。 本文介绍了基于单片机AT89C51的温度监测系统的设计方案与软硬件实现。采用电阻式温度传感器PT100 采集温度数据，模数转换器AD0809对采集的温度进行转换，液晶显示屏1602 显示温度数据，通过按键进行循环显示和单通道显示温度的设置。给出了系统总体框架、程序流程图和Proteus 仿真结果，并在硬件平台上实现了所设计的各种功能。 关键词：单片机AT89C51， 温度传感器PT100，模数转换器AD0809，液晶显示器1602 Abstract Temperature is an essential of environmental factors in our actual production，living and many other fields. It’s particularly important to control and detect the temperature promptly and exactly. With the development of the national economy, people need to all in the furnace, heat treatment furnace, chemical and biological monitoring of the temperature of the greenhouse and control. Single-chip computer to control not only has control of their convenience, simplicity and flexibility advantages, but also substantial increase in temperature was charged with technical indicators, which can greatly improve the quality and quantity of products. This article describes the AT89C51 microcontroller based temperature monitoring system design and software and hardware. PT100 temperature sensor using temperature data collected, the temperature of the collected AD0809 ADC conversion, LCD display temperature data in 1602,through buttons to set the different channel’sdisplay of the temperature, Overall frameworkof the system is given, the program flow chart and the Proteus simulation results and hardware platform designed to achieve the various functions. Key words: SCM AT89C51, temperature sensorPT100, Analog AD0809, LCD 1602 -Ⅱ-  -Ⅲ- 目录  TOC \o 1-3 \h \z \u  HYPERLINK \l _Toc263012951 摘要 Ⅰ  HYPERLINK \l _Toc263012952 Abstract Ⅱ  HYPERLINK \l _Toc263012953 目录 Ⅲ  HYPERLINK \l _Toc263012954 第一章引言 2  HYPERLINK \l _Toc263012955 1.1系统背景和意义 2  HYPERLINK \l _Toc263012956 1.2系统实际表述 2  HYP