环境温湿度124.PPTVIP

Status ofBES-III Detector Control System Xiaonan Li IHEP Outline Architecture of DCS Software architecture for BES-III DCS, Detector Control System. Status of hardware and software. Plan. System Architecture BES-III DCS Front End System DCS Client-Server Model OPC OPC, OLE for Process Control, standard interfaces defined by the OPC Foundation for device access. / Clients write/read to device or data sources by means of OPC. Clients can be located on the same machine as OPC, or on the remote machines. Specifications OPC Data Access OPC Alarms Events OPC Historical Data Access …. FEE VME Crate Remote Control Hardware Wiener VME Crates. Can bus Interface. Kvaser PCIcan-D cards, Can/PCI interface card, 2 Can channels, D-sub 9 pins connectors. Software Windows OS. PCIcan driver and Wiener OPC server are all available from vendor. High Voltage System Hardware CAEN HV, SY1527? TCP/IP, CAENet… Software Windows OS OPC server is available from vendor. We already setup a system as a OPC testbed to get experience on OPC. Gas system, Safety/Inter-locked, Magnet Hardware. PLC based. Siemens, S7-200 series. RS485/232 connection, PPI protocol. Software PC Access with OPC server Step 7 micro/win. PLC programming; OPC server configuration. Environment Monitoring. Temperature, Humidity, pressure, et al. Hardware, custom design, custom made. RS485/USB, RS485/1 Wire, SHT T/H sensor connecting modules, Low Voltage modules. Software. Server, vi-based or OPC server development. OPC server SDK. Softing OPC Toolbox C++. Custom Made Modules SCADA (Supervisory Control And Data Acquisition) DCS based on LabVIEW plus DSC module (Data Supervisory and Control). Functions OPI, Operator Interface. Data access. Historical Trending. Data logging and archiving. Alarm handling. Reports generation. The complete DCS channels List (1) The complete DCS channels List (2) Progress:Hardware The DCS needs more than 100 custom made modules. Progress: Software Setup HV and VME crate monitoring and cont