AUDIODAC和MUTE部分修改方法.docVIP

关于AUDIO DAC和MUTE部分的修改方法： 在8032目录下的MAKEFILE文件中有如下定义： !ifndef ADAC_DEF !if (defined(DO_1379) || defined(DO_SIMP79) || defined(DO_NUI) || defined(DO_NUI_S) || defined(DO_NUI_B)) ADAC_DEF = _CS4360_ //定义AUDIODAC类型，内置时此处定义_NPADAC_ !else # 1369 ADAC_DEF = _AV2188_ !endif # 1369 在VENDOR。H中关于AUDIO DAC定义处： //#define AC3_DITHER_MUTE //#define AC3_BASS_OVERFLOW_DETECT //#define DAC_AUTO_MUTE //#define DAC_DEEMPH //#define DAC_EXTPIN_MUTE #ifdef MT1389_REV_E //89E内置51CH的DAC #define MTK_6CH_ADAC #define DSP_AUTO_MUTE //mask it temperally, open it until dsp complete auto mute function. #undef _WM8756_ //#define MTK_ADAC_ON_STANDBY_PWRDWN //#define MTK_AUD_ADC #ifdef MTK_AUD_ADC //#define MTK_ADC_OSR256 // 8x downsample #define MTK_ADC_OSR128 // 4x downsample //#define MTK_ADC_OSR192 // 8x downsample //#define MTK_ADC_OSR96 // 4x downsample #endif // MTK_AUD_ADC #endif #ifdef MT1389_REV_HD //89HD内置51CH的DAC #define MTK_6CH_ADAC #ifdef MTK_6CH_ADAC #define DSP_AUTO_MUTE #undef _WM8756_ #else #define ASDATA_FROM_DIGITAL_PIN //ASDATA from ALS,AR,AL,ARS (0,1,2,3) #endif #endif #ifdef MT1389_REV_D //89D内置2CH的DAC //----- /* ADAC config for 89D Use internal ADAC onlt : open INT_ADAC, mask BOTH_INT_EXT_ADAC Use external ADAC only : mask both INT_ADAC and BOTH_INT_EXT_ADAC. Use internal and external both : open BOTH_INT_EXT_ADAC, mask INT_ADAC */ //#define INT_ADAC //#define BOTH_INT_EXT_ADAC //----- #ifdef INT_ADAC #define MTK_ADAC //#define DAC_AUTO_MUTE #define DSP_AUTO_MUTE #undef _WM8756_ #elif defined(BOTH_INT_EXT_ADAC) #define MTK_ADAC #else #undef MTK_ADAC #endif #endif #define _INTACLK_ // use MT1369 audio clock #if (defined(AUDIO_IN_EN) || defined(_WM8714_)) #define AUDIO_256FS #else #define AUDIO_384FS #endif #ifdef ADSP_USE_APLL #ifdef AUDIO_256FS #define ADSP_APLL_RATIO AC_APLD2 #else // AUDIO_384FS #define ADSP_APLL_RATIO AC_AP