煤矿井下定向钻进配套钻头的选型与使用-煤田地质与勘探.PDFVIP

第42 卷 第1 期 煤田地质与勘探 Vol. 42 No.1 2014 年2 月 COAL GEOLOGY EXPLORATION Feb. 2014 文章编号: 1001-1986(2014)01-0083-04 煤矿井下定向钻进配套钻头的选型与使用 1,2 1 1 孙荣军 ，石智军 ，李锁智 (1. 中煤科工集团西安研究院有限公司，陕西 西安 710077 ； 2. 西安科技大学建工学院，陕西 西安 710054) : 合理选配和使用钻头是提高钻进效率和节省钻进成本的关键。结合煤矿井下定向钻孔施工 的特点，提出了配套钻头的一般要求。介绍了目前常用钻头的类型和特点，重点介绍了 3 种不同 冠部形状的导向钻头的适用性及选型依据。总结了钻头合理使用的注意事项，为煤矿井下定向钻 孔施工合理选择和使用钻头提供了参考依据。 ：煤矿井下；定向钻进；钻头；选型 ：P634 ：A DOI: 10.3969/j.issn.1001-1986.2014.01.020 Selection and application of drill bit for directional drilling in underground coal mine 1,2 1 1 SUN Rongjun , SHI Zhijun , LI Suozhi (1. Xi ′an Research Institute, China Coal Technology and Engineering Group Corp, Xi ′an 710077,China; 2. School of Architecture and Civil Engineering, Xi ′an University of Science and Technology, Xi ′an 710054, China) Abstract: According to the characteristics of directional drilling in underground coal mines, the general require- ments of supporting bit were proposed, and the types and features of the currently used bit were introduced, then three directional bits of different crown were introduced about applicability and selection rule in detail, and the note of bit used correctly was summarized, providing a reference for selecting and using bit reasonably for direc- tional drilling in underground coal mines. Key words: underground coal mines; directional drilling; drill bit; selection [2] [1] a.