CentOS55添加一块新硬盘,分区并设置系统启动自动挂载的方法.docVIP

? CentOS5.5 添加一块新硬盘，分区并设置系统启动自动挂载的方法 ?????? 先把需要挂载的硬盘正确连接到电脑上，查看 BIOS，确保开机自检时，BIOS 能够检测并识别出新连接的硬盘，然后再进行下面的操作。[root@Linux ~]#?fdisk -l???//查看当前磁盘信息，就会发现最下面显示新加入的硬盘不是有效分区，如下：Disk /dev/sda: 21.4 GB, 21474836480 bytes255 heads, 63 sectors/track, 2610 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytes?? Device Boot????? Start???????? End????? Blocks??????????? Id ? ? System/dev/sda1?? *?????????? 1?????????? 1275???? ? ? 83???? Linux/dev/sda2??????????? 1276???????? 2349???? 8626905??????? 83 ? ? Linux/dev/sda3??????????? 2350?????? ? 2610???? 2096482+ ? ?? 82 ? ? Linux swap / SolarisDisk /dev/sdb: 21.4 GB, 21474836480 bytes255 heads, 63 sectors/track, 2610 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytesDisk /dev/sdb doesnt contain a valid partition table[root@Linux ~]#?fdisk /dev/sdb?? ??? ?//根据提示,对新硬盘进行分区操作Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabelBuilding a new DOS disklabel. Changes will remain in memory only,until you decide to write them. After that, of course, the previouscontent wont be recoverable.The number of cylinders for this disk is set to 2610.There is nothing wrong with that, but this is larger than 1024,and could in certain setups cause problems with:1) software that runs at boot time (e.g., old versions of LILO)2) booting and partitioning software from other OSs?? (e.g., DOS FDISK, OS/2 FDISK)Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)//这一步可以不做，就是可以通过输入 h 查看帮助信息Command (m for help):?h??h: unknown commandCommand action?? a?? toggle a bootable flag?? b?? edit bsd disklabel?? c?? toggle the dos compatibility flag?? d?? delete a partition?? l?? list known partition types?? m?? print this menu?? n?? add a new partition?? o?? create a new empty DOS partition table?? p?? print the partition table?? q?? quit without saving changes?? s?? create a new empty Sun disklabel?? t?? change a partitions system id?? u??