Sandvik DD2710 地下凿岩台车.pdfVIP

DD2710 DEVELOPMENT DRILL TECHNICAL SPECIFICATION Sandvik DD2710 is a compact and flexible single- KEY FEATURES boom electro-hydraulic jumbo for development Coverage area 34 m² drilling in narrow vein and mass mining as well as in Hydraulic rock drill HLX5 (20 kW) tunneling, in cross sections up to 34 m². Drill feed TF500-12’ (12’ rods) Boom B26F The DD2710 is equipped with Sandvik HLX5 hydraulic Hole length 3 440 mm (12’ rods) rock drill, which delivers 20 kW of percussion power Turning width (T-section) 2 750 mm for high penetration rates and good rock tool service Transport width 1 600 mm life in varying rock conditions. The universal B26F Transport height 2 535 mm / 2 750 mm boom is fitted with 360° feed rotation, automatic Transport length 10 065 mm (TF512) parallelism and a large and optimally shaped Operating weight 11 600 kg coverage, for fast and accurate face drilling and versatility. The direct controlled IBC control system has added automatic functions that allow the operator to concentrate safely on fast and accurate drilling. Sandvik DD2710 is mounted on a 4-wheel drive frame-steered and diesel powered carrier, which features a FOPS-approved safety canopy, and layout designed for good visibility and stability in tramming in small mining drifts and tunnels. The operating and maintenance interface are designed for easy access, safe operation and all service points are accessible from ground level.