含瓦斯煤全应力–应变过程中力学 及渗流特性试验研究.pdfVIP

Mine Engineering 矿山工程, 2015, 3(4), 188-194 Published Online October 2015 in Hans. /journal/me /10.12677/me.2015.34026 Experiment Study on Mechanics and Permeability of Coal Containing Gas under the Total Stress-Strain Tests 1 1 2 Qian Wang , Mingyue Lu , Weizhong Wang 1 Chongqing Vocational Institute of Engineering, Chongqing 2 State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University, Chongqing Email: qian.wang.0921@ th th th Received: Oct. 10 , 2015; accepted: Oct. 26 , 2015; published: Oct. 30 , 2015 Copyright © 2015 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Abstract A self-developed device called the coal-containing heat solid coupling servo seepage device is used to do the total stress-strain tests of coal samples. The result shows: In the process of continuous load, the stress-strain relationship of coal containing gas can be divided into four stages: the initial com- paction phase, the elastic phase, the yield and damage phase, the post-failure phase. The stress- strain relationship of these four phases makes a big difference; elastic modulus of coal containing gas first decreases and then keeps constant; it declines rapidly after destruction; the Poissons ratio firstly dropped after a slow rise, and it raised rapidly after destruction. With the change of axial stress, the axial stress of the coal containing gas and its permeability is opposite. Permeability of the coal containing gas is closely related with its volumetric strain. But we hav